Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Evan Mayer -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Gently pull on the small ribbon-wire where it connects with the Logic Boardlogic board to disconnect it.
[* black] Caution:icon_caution] Do NOT''not'' attempt to remove the logic board until the LCD is completely off. Do NOT''not'' use force to remove the wire as it may cause it to tear.
[* black] Gently pull on the small ribbon-wire where it connects with the Logic Boardlogic board to disconnect it.
[* black] Caution:icon_caution] Do NOT''not'' attempt to remove the logic board until the LCD is completely off. Do NOT''not'' use force to remove the wire as it may cause it to tear.