Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von William Schill -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Gently pull onRotate camera 180 degrees.
[* black] Disconnect the small ribbon-wire by gently pulling on
the small ribbon-wire where it connects with the logic board to disconnect itboard.
[* icon_caution] Do ''not'' attempt to remove the logic board until the LCD is completely off. Do ''not'' use excessive force to remove the wire as itbecause this may cause it to tear.
[* black] Gently pull onRotate camera 180 degrees.
[* black] Disconnect the small ribbon-wire by gently pulling on
the small ribbon-wire where it connects with the logic board to disconnect itboard.
[* icon_caution] Do ''not'' attempt to remove the logic board until the LCD is completely off. Do ''not'' use excessive force to remove the wire as itbecause this may cause it to tear.