Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Lauren Noyes

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use the pick side of the spudgera small pointed tool (ex. pen point or a screwdriver tip SL1.5) to insert into the 5 plastics tabs to split the front and rear panels.
[* blackicon_caution] Do not remove the back panels quickly. There is a wire connection that will be broken if too much force is applied.
[* icon_caution] CAUTION! Be careful not to force tabs inward because it will result in breaking the tabs.
[* black] Use the pick side of the spudgera small pointed tool (ex. pen point or a screwdriver tip SL1.5) to insert into the 5 plastics tabs to split the front and rear panels.
[* blackicon_caution] Do not remove the back panels quickly. There is a wire connection that will be broken if too much force is applied.
[* icon_caution] CAUTION! Be careful not to force tabs inward because it will result in breaking the tabs.