Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Klaudie Stone

Bearbeitung genehmigt von Klaudie Stone

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] UseSplit the front and rear panels by inserting a small pointed tool (ex.such as a pen point or a screwdriver tip SL1.5) to insert in the 5 plastic tabs in order to splitalong the front and rear panelssides of the device.
[* icon_caution] Do not remove the back panels quickly. ThereIf too much force is applied, there is a wire connection that will brake if too much force is appliedbreak.
[* icon_caution] CAUTION! Be careful not to force the tabs inward because itinward. This will result in broken tabs.
[* black] UseSplit the front and rear panels by inserting a small pointed tool (ex.such as a pen point or a screwdriver tip SL1.5) to insert in the 5 plastic tabs in order to splitalong the front and rear panelssides of the device.
[* icon_caution] Do not remove the back panels quickly. ThereIf too much force is applied, there is a wire connection that will brake if too much force is appliedbreak.
[* icon_caution] CAUTION! Be careful not to force the tabs inward because itinward. This will result in broken tabs.