Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Courtney Crockett -

Bearbeitung genehmigt von Evan Noronha

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Insert the flat end of a spudger in between the lower case and lower front panel near the top right corner of the DSi.
-[* black] Carefully run the spudger along the right edge of the DSi, creating an opening in the process.
-[* black] Continue running the spudger along the backside of the DSi until the majority of the lower case has been separated from the lower front panel.
+[* red] Insert the spudger in between the lower casing and lower panel near the top right corner of the DSi.
+[* blue] Carefully run the spudger along the edge of the outer casing, creating an opening between the body and the casing.
+[* blue] Continue running the spudger around the body of the DSi until the majority of the lower case has been separated.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version