Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 6

Bearbeitet von Casey Matalone

Bearbeitung genehmigt von Casey Matalone

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Now moveWith the throw away paint brush begin to apply the resin to the frontback side of the hole and removedirectly on the cardboardcleaned surface.
[* black] Again size your material; however, this time you want you material to be roughlyAfter the size and shaperesin is on take one of your hole.
[* icon_note] Cut
the fiberglass pieces you cut out at least two or three layers ofearlier and place over the material inhole onto the beginning. You may needresin.
[* black] Continuing with the rush apply
more laterresin over onto the fiberglass until it is entirely soaked.
[* black] Now moveWith the throw away paint brush begin to apply the resin to the frontback side of the hole and removedirectly on the cardboardcleaned surface.
[* black] Again size your material; however, this time you want you material to be roughlyAfter the size and shaperesin is on take one of your hole.
[* icon_note] Cut
the fiberglass pieces you cut out at least two or three layers ofearlier and place over the material inhole onto the beginning. You may needresin.
[* black] Continuing with the rush apply
more laterresin over onto the fiberglass until it is entirely soaked.