Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Joeny Zhen -

Bearbeitung genehmigt von Joeny Zhen

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Once the pairs of wires have been stripped, put one of the paired wires on the component holder's clamp, and put the other pair on the remaining clamp.
+[* black] Put one of the paired wires on the component holder's clamp, and put the other pair on the remaining clamp.
[* black] Make sure the wires' stripped ends are facing each other or towards the center of workplace. If not, orientate the wires accordingly.