Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Joeny Zhen -

Bearbeitung genehmigt von Joeny Zhen



[* black] With the stripped-wire ends close to each other and firmly in place, hover over it with the soldering iron and solder, and properly melt the solder onto the stripped-wire ends.
[* black] To rotate the wire when trying to solder the connection completely, simply rotate the clamps to your desiring.
+[* black] Do not heat the wires too long as the heat will transfer throughout the wire and solder, and it will separate the connections.