Änderungen an Schritt Nr. 2
Bearbeitet von Matt Wilborn –
Bearbeitung genehmigt von Matt Wilborn
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* black] After each of the screws is unscrewed insert the screw driver with a flathead attachment in between the side case pannel and the motherboard. Move the screwdriver in an upward motion to pry the motherboard out of the plastic housing. Work all the way around the motherboard until the motherboard is free. |
|---|
Bild 1
Kein vorheriges Bild
Hinzugefügt