Repariere deine Sachen Community Store

Änderungen an diesem Schritt

Bearbeitet von Chris Scharff –

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Remove the two cables near the rear of the desktop (colored squares). Push in the tab of each molex connector, and pull straight up. The black cable requires a large amount of force to disconnect, so make sure you pull it straight up.
-[* icon_caution] Caution: Pulling at an angle or yanking too hard could result in a tear in the cable.
+[* black] Locate the two cables at the rear of the desktop (colored squares).
+[* yellow] Remove the blue cable with the black connector head by pushing in the tab of the connector and pulling straight up.
+[* red] Remove the black cable with the white connector head by grasping as close as you can to the connector head and pulling straight up.
+[* icon_caution] Caution: Pulling at an angle or yanking too hard could tear the cable.