Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Ryan Mostofi

Bearbeitung genehmigt von Ryan Mostofi

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Measure the approximate length of heat shrink to throughly cover all nearby damage with a single piece of heat shrink.
[* icon_note] The length of the heat shrink should be longer than the actual length of the damaged or exposed wire.
[* icon_note] Use the most appropriate diameter size of3/8" diameter heat shrink. This size diameter is large enough to slide over the charging interface and small enough to secure itself on the wire when heated.
[* icon_note] Use the most appropriate diameter size of3/8" diameter heat shrink. This size diameter is large enough to slide over the charging interface and small enough to secure itself on the wire when heated.
[* black] Cut the heat shrink to appropriate length using scissors.