Änderungen an Schritt Nr. 2
Bearbeitet von Samantha Dahl –
Bearbeitung genehmigt von Samantha Dahl
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Using the T6 Torx Screwdriver, remove the four 3.16mm screws from the front panel. | |
| - | [* blue] Note that the fourth screw is under a fold in the ribbon cable. |
| + | [* blue] Note that the fourth screw is located under a fold in the ribbon cable. |