Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Ricky -

Bearbeitung genehmigt von Ricky

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera (see photo)camera.
[* redorange] Locate and remove the 2 screws (3.2mm) found on the side of the camera (see photo)camera.
[* redyellow] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the cable inputs are found (see photo)terminals are.
[* bluegreen] Open the flap revealing the cable inputs (as shown in the photo) and remove the final screw (3.8mm) found inside.
[* icon_note] After removing the final screw, the camera body cover will be loose.
[* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera (see photo)camera.
[* redorange] Locate and remove the 2 screws (3.2mm) found on the side of the camera (see photo)camera.
[* redyellow] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the cable inputs are found (see photo)terminals are.
[* bluegreen] Open the flap revealing the cable inputs (as shown in the photo) and remove the final screw (3.8mm) found inside.
[* icon_note] After removing the final screw, the camera body cover will be loose.

Bild 2

Alte Version

Neue Version

Bild 3

Alte Version

Neue Version