Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Shannon Farwell -

Bearbeitung genehmigt von Shannon Farwell

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the bottom side of the camera.
[* orange] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the side of the camera.
[* yellow] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the side of the camera where the terminals are.
[* green] Open the flap revealing the cable inputs and remove the final screw (3.8mm3.8mm, Phillips #00) found inside.
[* red] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the bottom side of the camera.
[* orange] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the side of the camera.
[* yellow] Locate and removeRemove the 2 screws (3.2mm3.2mm, Phillips #00) found on the side of the camera where the terminals are.
[* green] Open the flap revealing the cable inputs and remove the final screw (3.8mm3.8mm, Phillips #00) found inside.