Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 19

Bearbeitet von Kyle Wiens

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] This board is held in place by four standoffs. We used [product|IF145-024|needle-nosed pliers], but a [product|IF145-009|5 mm nut driver] would be the ''right'' tool for the job.
[* black] Our friends at [http://www.adafruit.com/|Adafruit] have posted a [http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$1,000 bounty] for the first team to write an open source driver for Kinect. The Wiimote has been tremendously useful for our hobby robotics projects, and the Kinect's advanced sensors could really jump-start robotics research.