Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 19

Bearbeitet von abc

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] This board is held in place by four standoffs. We used [product|IF145-024|needle-nosed pliers], but a [product|IF145-009|5 mm nut driver] would be the ''right'' tool for the job.
[* black] Our friends at [http://www.adafruit.com/|Adafruit] have posted a [http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$2,000 bounty] for the first team to write an open source driver for Kinect. The drivers are already available if you are interested.
[* black]
The Wiimote has been tremendously useful for our hobby robotics projects, and the Kinect's advanced sensors could really jump-start robotics research.
[* black] Our friends at [http://www.adafruit.com/|Adafruit] have posted a [http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$2,000 bounty] for the first team to write an open source driver for Kinect. The drivers are already available if you are interested.
[* black]
The Wiimote has been tremendously useful for our hobby robotics projects, and the Kinect's advanced sensors could really jump-start robotics research.