Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von lsward -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Loosen the goose-neck with an Allan wrench.
-[* black] After loosening the goose-neck, it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.
-[* black] Position the handlebars to your preferred height.
+[* black] Loosen the goose-neck (adjustable quill stem) with a 6 mm Allen wrench.
+[* black] After loosening the goose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.
+[* black] If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.
+[* black] Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.
+[* black] Make sure you don't raise quill stem above minimum insert line.