Canon Powershot SX30 IS Back Camera Housing Replacement Schritt Nr.3 Verlauf

Änderungen an Schritt Nr. 3

Bearbeitet von Carlos Landa – 23. Sep 2018

Bearbeitung abgelehnt von Kristen Gismondi

-	[* black] Turn the camera ~~so that you face the~~ bottom side ~~of the camera~~
-	[* red] Unscrew the three 4 mm screws ~~shown red using a screwdriver~~
-	[* orange] Unscrew the lone 6 mm screw ~~shown orange~~
-	[* ~~yellow~~] Do not ~~touch~~ the screw ~~shown~~ yellow~~, it can remain in~~
+	[* black] Turn the camera to bottom side.
+	[* red] Unscrew the three 4 mm screws.
+	[* orange] Unscrew the lone 6 mm screw.
+	[* icon_caution] Do not remove the screw outlined in yellow.