Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Kevin Purdy -

Bearbeitung genehmigt von Kevin Purdy

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] With the Jawbone logo facing towards you and with correct orientation, place the Jambox with the left end cap facing upward.
[* red] Unscrew indicated T6 9.7 mm screws.
-[* orange] Flip the Jambox so the other end cap is facing up. The USB cable is on this side (metal grounding clip, indicated in orange). Repeat the above step.
+[* yellow] Gently loosen the tabs from their anchor points so the bottom may be removed.
+[* orange] Flip the Jambox so the other end cap is facing up. The USB cable is on this side (metal grounding clip, indicated in orange). Repeat the above two steps.

Bild 3

Alte Version

Neue Version