Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Rachel Nicole -

Bearbeitung genehmigt von Rachel Nicole

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Carefully lift off metal plate, motherboard, and CD tray circuit board and flip over as shown
-[* icon_caution] Caution: There is a wire strip running through metal plate that is soldered to motherboard and power supply board, thus motherboard cannot be completely removed. Do NOT force upwards. With the Japanese Mega CD (though this may also be applicable to machines from other regions), all the ribbon cables can be safely unplugged by simply pulling them out of their slot.
+[* black] Carefully lift off the metal plate, the motherboard, and the CD tray circuit board and flip each piece over, as pictured.
+[* icon_caution] Caution: There is a wire strip running through the metal plate that is soldered to motherboard and power supply board, so the motherboard cannot be completely removed. Do NOT force it upwards. All the ribbon cables can be safely unplugged by simply pulling them out of their slot.