Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Sam Goldheart -

Bearbeitung genehmigt von Sam Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] The bottom panel was a bit of a red herring so we investigate the LCD arm for weak spots.
[*
black] The rear LCD panel is connected by a thin ribbon cable, snakedcable that disappears into the back of the camera body. We're pretty sure we'llWe'll probably have to deal with that before we can crack open the camerathis camera...
[* black] The bottom panel was a bit of a red herring so we investigate the LCD arm for weak spots.
[*
black] The rear LCD panel is connected by a thin ribbon cable, snakedcable that disappears into the back of the camera body. We're pretty sure we'llWe'll probably have to deal with that before we can crack open the camerathis camera...
[* black] Luckily, a small door on the back of the display assembly opens the way to a tiny ZIF securing the cable.
[* black] While we've got the assembly off, let's take it forWe allow ourselves a spin and get a look at those dotsbrief detour to investigate the display before delving into the camera body.
[* black] While we've got the assembly off, let's take it forWe allow ourselves a spin and get a look at those dotsbrief detour to investigate the display before delving into the camera body.