Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Walter Galan

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.
+[* icon_note] The tray will partially pop out of the laptop.
+[* black] Firmly pull the drive straight away from the laptop.
+[* icon_caution] While pulling the drive out, be careful not to bend the sliding rails on both sides of the optical drive.
+[* black] At this point you can remove the entire optical drive assembly, or you can continue to disassemble the optical drive itself.