Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 3

Bearbeitet von Thomas Rill –

Bearbeitung genehmigt von Thomas Rill

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Locate the four plastic flaps
-[* icon_note] These ribbon cables are detached as a precaution in case the ribbon cables remain stuck to the battery.
-[* black] Lift the flaps with a metal spudger
-[* black] Use a flat object like a spudger or plastic ID card to gently pry the battery from its place
-[* icon_note] There may be glue or tape attached to the bottom of the battery, so use the card to pry the battery away, you could perform a sort of light swiping action if you feel resistance
+[* red] Locate the four black plastic flaps depicted
+[* icon_note] The ribbon cables under the battery are detached as a precaution in case the ribbon cables remain stuck to the battery during removal.
+[* black] Gently lift the flaps with a metal spudger
+[* black] Use a flat object like a spudger or a plastic ID card to gently pry the battery from device
+[* icon_note] There may be glue or tape attached to the bottom of the battery, so it is best use a card to pry the battery away. If you feel resistance, locate the source and use your spudger to detach the glue.