Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Emily Gillo -

Bearbeitung genehmigt von Emily Gillo

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Remove the four 2.4 mm Phillips screws as shown in picture.
-[* black] Lift up the LCD screen from the front case.
-[* icon_caution] Beware of the wire that is connected to the board in the other side.
+[* red] Use the screwdriver to remove the four 2.4mm Phillips screws as shown in picture, circled in red.
+[* orange] Lift up the LCD screen from the front case.
+[* icon_caution] Potential for device damage: The wire is still connected to the board in the other side.