Änderungen an Schritt Nr. 1
Bearbeitet von Chris Hoffman -
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Remove the following 3 screws: |
| [* red] One 11 mm Phillips in the middle of the case. (Head: 5mm dia. x .75mm thick) [* orange] Two 14.5 mm |
| [* red] One 11 mm Phillips in the middle of the case. (Head: 5mm dia. x .75mm thick) [* orange] Two 14.5 mm |
| [* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out. |
| [* icon_reminder] The shorter of the three screws goes in the middle. |