Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 13

Bearbeitet von Andrew Churchill -

Bearbeitung genehmigt von Andrew Churchill

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* blackicon_caution] Glue the cord onto the circuit board to prevent future loosening of the wires. Leave slack on both sides and allow glue to harden. Use cation when using the hot glue gun that you do not burn yourself or damage the board. Ensure you allow any recently soldered points to cool back to room temperature before performing this step.
[* blackicon_caution] Glue the cord onto the circuit board to prevent future loosening of the wires. Leave slack on both sides and allow glue to harden. Use cation when using the hot glue gun that you do not burn yourself or damage the board. Ensure you allow any recently soldered points to cool back to room temperature before performing this step.

Bild 1

Alte Version

Neue Version