Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 14

Bearbeitet von Andrew Churchill -

Bearbeitung genehmigt von Andrew Churchill

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* blackred] Reverse steps from 6 through to 2 to reassemble controller. Before replacing screws make sure the controller back fits tightly to the controller face. If needed trim excess glue from around the cord to ensure a good fit.
[* blackred] Reverse steps from 6 through to 2 to reassemble controller. Before replacing screws make sure the controller back fits tightly to the controller face. If needed trim excess glue from around the cord to ensure a good fit.

Bild 1

Alte Version

Neue Version