Änderungen an Schritt Nr. 2
Bearbeitet von Jeffrey J O'Dell –
Bearbeitung genehmigt von Jeffrey J O'Dell
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Use a plastic opening tool to lift the small black hinge holding the gold ribbon in place at the top of the motherboard. Once the black hinge is lifted, gently slide the ribbon out of the socket. |
|---|---|
| - | [* red] Once the wire is removed, unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver. |
| + | [* red] Use a plastic opening tool to lift the small hinge holding the circled gold ribbon in place, then gently slide the ribbon out of the socket. |
| + | [* icon_caution] Use cation, and pull the ribbon straight out. If damaged the camera may not work the same after reassembly. |
| + | [* red] Next unscrew the three 4.3 mm Phillips #PH00 screws holding the motherboard down using the PH00 screwdriver. |