Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von JOSHUA MILLER -

Bearbeitung genehmigt von Adam O'Camb

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Before you can remove the screen, you must first heat the surface evenly to loosen the adhesive.
[* icon_note] You may have to reheat the heating pad once or twice to get enough heat onto the screen.
[* icon_caution] If you're using a heat gun, do not hold the heat in one spot for more than a few seconds. Instead, run the heat along the outer edge of the screen with a brushing motion.
[* icon_caution] If you're using a heat gun, do not hold the heat in one spot for more than a few seconds. Instead, run the heat along the outer edge of the screen with a brushing motion.