Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Matthew Wirsch -

Bearbeitung genehmigt von Matthew Wirsch

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Before you can remove the screen, you must first heatEvenly heat the surface evenlyof the screen using the heat gun to loosen the adhesiveadhesive that is holding the screen to the phone case.
[* icon_note] You may have to reheat the heating pad once or twice to get enough heat onto the screenduring this process.
[* icon_caution] If you're using a heat gun, do not hold the heat inavoid heating one spot for more than a few seconds. Instead, run the heat along the outer edge of the screen with a brushing motion.
[* black] Before you can remove the screen, you must first heatEvenly heat the surface evenlyof the screen using the heat gun to loosen the adhesiveadhesive that is holding the screen to the phone case.
[* icon_note] You may have to reheat the heating pad once or twice to get enough heat onto the screenduring this process.
[* icon_caution] If you're using a heat gun, do not hold the heat inavoid heating one spot for more than a few seconds. Instead, run the heat along the outer edge of the screen with a brushing motion.