Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von martin -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Use a spudger to disconnect the two newly-revealed temperature sensor connectors from the logic board.
+[* black] Use a spudger to disconnect the two newly-revealed temperature sensor connectors from the logic board. If your heatsink has the small black three wall connectors: slide the connectors toward the back. If you lift them, you're break the soldered hooks off the logic board.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there is only one temperature sensor.

Bild 2

Alte Version

Neue Version