Beiens Cartoon RC Race Car LED Light Replacement Schritt Nr.4 Verlauf

Änderungen an Schritt Nr. 4

Bearbeitet von Amber Ashley – 1. Dez 2015

Bearbeitung genehmigt von Amber Ashley

-	[* black] ~~On the back of the motherboard, there are two pieces of solder holding the LED leads in place.~~ To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.
+	[* black] To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.
	[* black] While the solder is liquid, lightly pull on the LED to remove it from the motherboard.
	[* icon_caution] The soldering iron will get very hot while it's in use. Be sure to place it on top of a heat protected surface and be careful not to touch the operational end.