Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Johnny Stephens

Bearbeitung genehmigt von Evan Noronha

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Front Panel
[* black] You will not wantThe screen assembly is secured to try to pry it up, just insert the pick down to loosenplastic backing with clips. Insert the clips.
[* black] Be extra careful not to damage
spudger between the screen as it is fragileand plastic.
[* black] Work your way around the device being careful arounddevice, freeing it from the connecting clips.
[* black] Take care when near
the MicroSD, sim cardcard, power, and power volume buttons
[* black] After working your way around the device, attemptAttempt to lift it out of the plastic frame. You may need to loosen some more clips if it is difficult to remove.
[* black] Lift the device out of the chassis from the bottom wherebottom, near the microUSB port is after the clips are adequately loosenedport.
[* black] You will not wantThe screen assembly is secured to try to pry it up, just insert the pick down to loosenplastic backing with clips. Insert the clips.
[* black] Be extra careful not to damage
spudger between the screen as it is fragileand plastic.
[* black] Work your way around the device being careful arounddevice, freeing it from the connecting clips.
[* black] Take care when near
the MicroSD, sim cardcard, power, and power volume buttons
[* black] After working your way around the device, attemptAttempt to lift it out of the plastic frame. You may need to loosen some more clips if it is difficult to remove.
[* black] Lift the device out of the chassis from the bottom wherebottom, near the microUSB port is after the clips are adequately loosenedport.