Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Alex Wineteer -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Unscrew the screws holding the hard drive case in place. Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board.
+[* black] Unscrew the torx #8 screws holding the hard drive case in place. Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board by pulling the cable up and out of its connector.