Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von xgonin -

Bearbeitung genehmigt von David Hodson

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Unscrew the torx #8 screws holding the hard drive case in place. Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board by pulling the cable up and out of its connector.
+[* red] Unscrew the torx #8 screws holding the hard drive case in place.
+[* black] Lift the hard drive out, and disconnect the ribbon cable connecting the hard drive to the logic board by pulling the cable up and out of its connector.