Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Becca Chance -

Bearbeitung genehmigt von Becca Chance

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* red] Unscrew the torx #8 screws holding the hard drive case in its place on the logic board.
-[* black] Lift up on the hard drive and disconnect its ribbon cable from the logic board, just like in the previous steps.
+[* red] Unscrew the Torx #8 screws holding the hard drive case in place on the logic board.
+[* black] Lift up on the hard drive to disconnect its ribbon cable from the logic board, just like in the previous steps.