Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Dan -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector
card.
[* black] Disconnect the three antenna cables from the Airport card, and the black inverter cable from the logic board.
[* icon_note] The inverter cable connector may be covered by a small piece of foam tape. Remove this cube before disconnecting the connector
card.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.