Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Tom Green -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* icon_note] On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Bild 2

Alte Version

Neue Version