Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von ZFix -

Bearbeitung genehmigt von ZFix

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Insert wisdom here.
+[* black] On the new touch screen or on the main frame put adhesive sticker 3mm.
+[* icon_caution] Be careful not to cover the the places for the camera, sensor, earpiece, etc.
+[* red] Lift the logic board a little bit, so that the touch screen flex cable can pass.
+[* icon_note] It's easier if you can order the touch screen together with adhesive which is cut off specifically for model.

Bild 3

Alte Version

Neue Version