Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Aspyn Bessler -

Bearbeitung genehmigt von Aspyn Bessler

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Begin by removing the outside screws using a Phillips #000 Screwdriver:
-[* red] Remove the three 3.6 mm silver screws located on the bottom of the camera.
-[* orange] Remove all four of the 4.7 mm screws from the sides of the camera.
+ [* red] Remove the three 3.6 mm silver screws located on the bottom of the camera.
+ [* orange] Remove all four of the 4.7 mm screws from the sides of the camera.