Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Chris Benedict -

Bearbeitung genehmigt von Chris Benedict

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] On the underside of the battery hatch, locate the single screw connecting the battery contact to the hatch.
[* black] Use a Phillips screwdriver with a #0 bit to remove the 3.0 mm screw from the hatch.
[* blueblack] Lift the contact from the end where the screw was located and pull away from the hatch to remove it.
[* black] Use a Phillips screwdriver with a #0 bit to remove the 3.0 mm screw from the hatch.
[* blueblack] Lift the contact from the end where the screw was located and pull away from the hatch to remove it.

Bild 2

Alte Version

Neue Version