Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Jaxon Cramer -

Bearbeitung genehmigt von Jaxon Cramer

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Locate the four 3.0 mm screws holding a thin, black plastic film to the back of the LCD screen. Remove them using a Phillips screwdriver with a #0 bit.
[* black] After the screws have been removed, the black plastic film and LCD screen (white on the interior side) can be separated from the screen by handhand by pulling from the top edge closest to the side of the case with the power button.
[* black] After the screws have been removed, the black plastic film and LCD screen (white on the interior side) can be separated from the screen by handhand by pulling from the top edge closest to the side of the case with the power button.