Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Chris Benedict -

Bearbeitung genehmigt von Chris Benedict

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Locate the four 3.0 mm screws holding a thin, black plastic film to the back of the LCD screen. Remove them using a Phillips screwdriver with a #0 bit.
[* black] After the screws have been removed, the black plastic film and LCD screen (white on the interior side) can be separated from the screenremoved by hand by pulling from the top edge closest to the side oflifting up the case withend opposite the power buttonattached ribbon cable.
[* black] After the screws have been removed, the black plastic film and LCD screen (white on the interior side) can be separated from the screenremoved by hand by pulling from the top edge closest to the side oflifting up the case withend opposite the power buttonattached ribbon cable.