Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 7

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Use the same method above to solder the second resistor lead to the circuit board.
[* icon_note] After soldering a joint, if you are going to put the soldering iron down, be sure to place it back in its stand to prevent burning yourself or anything around you.
[* black] Cut the extra lengthlengths of the resistor leadleads with a pair of wire cutters. NASA workmanship standards state that any length up to 2.29 mm is acceptable.
[* black] Cut the extra lengthlengths of the resistor leadleads with a pair of wire cutters. NASA workmanship standards state that any length up to 2.29 mm is acceptable.