Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 12

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Locate your single yellow/violet/black/gold 47 ohm resistorresistor (47 Ohm).
[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.
[* black] Locate your single yellow/violet/black/gold 47 ohm resistorresistor (47 Ohm).
[* red] Like you did withInstall this resistor into the first six resistors, bend the leads and place them through the holes around the rectangleterminal marked R7.
[* black] Solder
R7 on the jointscircuit board.