Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 14

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Use the same soldering techniques to installBend the leads of the small red diode around rectangle D1 as you did to installand insert it into the resistors in the previous stepsterminal marked D1.
[* icon_remindericon_note] Make sure that the cathode (marked by a small black band on the diodeband) lines up with the white band instripe on the circuit board.
[* black] Use the same method you used to solder the resistors to the
board illustrationto install the diode.
[* red] Use the same soldering techniques to installBend the leads of the small red diode around rectangle D1 as you did to installand insert it into the resistors in the previous stepsterminal marked D1.
[* icon_remindericon_note] Make sure that the cathode (marked by a small black band on the diodeband) lines up with the white band instripe on the circuit board.
[* black] Use the same method you used to solder the resistors to the
board illustrationto install the diode.