Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 14

Bearbeitet von Jake Devincenzi -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Bend the leads of the small red diode and insert them into the terminal marked D1'''D1'''.
[* red] Bend the leads of the small red diode and insert them into the terminal marked D1'''D1'''.
[* icon_note] Make sure that the cathode (marked by a small black band) lines up with the white stripe on the circuit board.
[* black] Use the same method you used to solder the resistors to the board to install the diode.