Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 28

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Insert wisdom hereNo, you weren't ripped off, those two leads aren't supposed to have any components in the middle of them.
[* black] To solder the battery leads to the circuit board, set the tip of the soldering iron on the solder that's on the positive pad.
[* black] When the solder begins to melt again, quickly insert the end of the lead into the melted solder.
[* black] Remove the soldering iron and let the solder cool around the lead.
[* icon_note] You can melt the solder again or add more solder if you don't get it right the first time
.
[* black] Insert wisdom hereNo, you weren't ripped off, those two leads aren't supposed to have any components in the middle of them.
[* black] To solder the battery leads to the circuit board, set the tip of the soldering iron on the solder that's on the positive pad.
[* black] When the solder begins to melt again, quickly insert the end of the lead into the melted solder.
[* black] Remove the soldering iron and let the solder cool around the lead.
[* icon_note] You can melt the solder again or add more solder if you don't get it right the first time
.