Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 33

Bearbeitet von Jake Devincenzi -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Keeping the battery compartment in your hand with your fingers holding the screws in place, place the circuit board onto the battery compartment, sliding the screws through the two holes on either side of the speaker in the center.
[* icon_note] Make sure that the top of the circuit board (the part that says "Brain Game") lines up with the top of the battery compartment (the side with three metal rings on the outside, not two).
[* black] Use your fingers to loosely screw the two included nuts onto the screws that should now protrude through the circuit board.
[* black] Use your fingers to loosely screw the two included nuts onto the screws that should now protrude through the circuit board.