Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 34

Bearbeitet von David Hodson -

Wartet auf Freigabe

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Place a 5.5 mm nut driver or socket over one of the battery compartment screw nuts.
[* black] Place a 5.5 mm nut driver or socket over one of the battery compartment screw nuts.
[* black] Turn the circuit board over.
[* black] Use one hand to hold the socket in place and tighten the battery compartment screw with a Phillips #2 screwdriver.
[* black] Follow the same procedure to tighten the other battery compartment screw.